An upper floor above a High Street passage
The list entry for 127 High Street records a side passage associated with a former burgage plot and an upper floor continuing over the passage. This is an address-specific example of how the route to the back and the building above it can form a more complex arrangement than a detached-house plan suggests.
Ask whether the sides and ceiling can be viewed and whether any neighbouring occupier controls the gate. For the inspection, identify the junctions between the passage, main house and later additions. Do not assume that the route belongs wholly to the house or that visible access means there is permission to inspect adjoining private areas. The historical plot example frames an enquiry; it does not settle title.
Suppose a householder wants to widen a doorway off such a passage. Mark the masonry to be removed, the replacement bearing and any temporary support standing in the passage. A length of wall abutting a path does not become a party structure simply through use of that path by neighbours. Establish the construction and affected interests. Where the design exercises a right under section 2 of the Party Wall etc. Act 1996, a party structure notice is served under section 3.
The other owner may occupy the upper room rather than the land at passage level. Supply the engineer's section, available title or lease plan and the location of entrances. Ask separately who controls the gate or can arrange access to the room. This is particularly important when the window of time available for a schedule of condition differs from the proposed period of construction access.
Know which roof is in the job
Historic England’s account of 127 High Street describes different front and rear roof pitches and evidence of alteration to the roof structure. These details illustrate why the apparent age of a facade need not explain the roof behind it.
The 1908 county history described the High Street as consisting for the most part of two-storied houses or shops of brick and plaster, slated or tiled, in very varied styles, with old half-timber cottages and sixteenth-century half-timbered houses among them. It recorded the Sayer Almshouses, dated 1684, as a range of low red brick buildings.
For a loft proposal to one part of a row, identify which roof pitch would be raised, where the new load is transferred and how the retained roof of the adjoining house is to remain weatherproof. If there is a junction between two roof phases, place it on a section alongside the party wall. A new covering fitted in the past on one slope cannot establish what supports the slope beyond the ridge. Give earlier drawings a date and label what could be seen when they were prepared.
Excavating beyond a semi-detached villa
The same account says the Kitsbury farm lands, south of the western High Street, were first developed as a building estate about 1870, followed by streets of detached and semi-detached houses. Dacorum's statement for the Ashlyns and Wigginton plateau describes the town's outskirts where they meet the plateau as essentially composed of medium to large prestigious houses and villas from the late Victorian era onwards, and its statements for the upper and lower Bulbourne valley describe the town spreading up the valley slopes.
On a plot rising away from the street, show the actual ground line on both sides of a boundary. Relate the bottom of a planned trench to the neighbour's foundation using a common datum. The nearest structure might be a return attached to a villa, with different foundations from the main house. The surveyor needs distances and relative depths for section 6. If the design also places a wall at the line of junction, its section 1 position needs checking independently.
A pre-work record should show how to find the relevant surface again. Number the rooms on the agreed plan, include the point of entry into a passage and photograph its ceiling and each visible face from recognisable positions. Where an old finish changes at an arch, patched opening or roof junction, record the location. If paint obscures the fabric, describe the surface seen and record any earlier images or drawings separately.
The permission and the section detail
Dacorum Borough Council can supply the planning and heritage records for the address. Confirm whether a current approval shows the particular alteration. Retain building control papers, private permissions and any evidence of a way through the passage alongside the party wall file. An award cannot vary a title deed or replace listed building consent. When the designer revises support to preserve historic fabric, identify what now changes at the neighbour's wall or floor and have the surveyor review it before instruction to proceed.
If a neighbour's drawing leaves out the passage
Give the surveyor an annotated copy showing the entrance, the room over the route and the face of the wall nearest the proposed work. Keep the original notice, its enclosures and the date it arrived. Our adjoining-owner service explains the choices available when replying, including what information helps an appointed surveyor.
Berkhamsted party wall questions
Should a surveyor photograph the inside of the passage or the room over it?
Agree access to the parts that might be affected, and locate the views vertically on the section. Photographing only one level can leave the position of the other ambiguous.
Can the date of Sayer’s almshouses be used to date another High Street roof?
It identifies the recorded group. Compare the visible arrangement and available evidence for the particular roof before attaching a date to timbers or subsequent work.
Our foundation section is measured from street level. What else does the neighbour need?
Show how street level relates to the working area and adjoining ground, the depth of the proposed excavation and the supported evidence for the neighbouring foundation.