Draw the plot as it stands
Kingston's Borough Character Study describes the area as predominantly two storey detached houses on substantial plots at low density, with more height in a limited number of blocks of flats, grander houses and health and educational buildings. It records that the character changed significantly after the Second World War, with a succession of cul-de-sacs, closes, loops, dead-ends and gated developments containing detached houses on significantly smaller plots and at higher densities than the surrounding grain.
A substantial garden can contain structures that need a separate discussion about scope. Mark retaining walls, detached accommodation, garages and any unusual installation on the plan. Tell us which spaces can be opened and whether a gate, planting or change in level restricts access to the house elevations.
A section 6 assessment under the Party Wall etc. Act 1996 starts with the actual excavation and the adjoining structure. On an irregular plot a neighbour's garage, basement return or other building may be much nearer to the deepest excavation than their front elevation suggests. Plot the limits of the dig and choose the section where the distance and level are critical. Include any deeper local excavation for a lift, drain or pile cap if it forms part of the project. Mark which depths have been measured and the source of any earlier foundation information.
Where a large house has acquired a separately occupied wing, obtain documents identifying the owner of each part. A design drawing may treat the whole original mansion as “existing” while the legal interests changed when the land was subdivided. A project can concern a neighbour who enters from another close or whose postal address differs from the original house. Identify people and premises before preparing the notice.
Following a roof into an earlier wing
Kingston's page for the Coombe Wood conservation area, designated in January 1990, summarises its interest as large Victorian, Edwardian and 20th century properties in a semi-rural street scene around the golf course. It notes that Renfrew Road, laid out in 1908, is lined with smaller detached houses in the Domestic Revival style, drawing on Queen Anne, Arts and Crafts and early vernacular elements. The same page says Warren House, built in 1865 with additions of 1884 and later, shows its growth in a complex roof form with many gables, chimneys, towers and bay windows.
Identify where a side wing meets the original house, where a garage became accommodation and where an opening connects previously separate rooms. A current plan alone may make several phases appear to be one coherent building.
On a roof conversion show how and where new loads enter the older structure. Where the engineer proposes a bearing in a qualifying party structure, assess section 2 and the section 3 party structure notice. Ask for the connection detail, the support during installation and the intended weathering on completion. If the structure is wholly on the building owner's land, ask what separates it from any neighbouring addition and whether that addition shares it. Judging from the rhythm of gables seen on the approach can give the wrong answer.
A new flank facing a former garden
Kingston's page for the Coombe Hill conservation area, designated in January 1996, describes the estate and hinterland of the demolished Coombe Warren, with several mid 19th century properties by the architect George Devey, and today largely 20th century development within the grounds of two 19th century mansions. Kingston's Residential Design SPD, adopted in July 2013, notes some pressure to develop back gardens in areas like Coombe Hill, where relatively low density development on larger plots creates a precondition for subdivision.
A section 1 question can arise if the proposed new flank is on the line of junction. Locate it against current title and survey information and establish where the footing and finishes would extend. Keep any genuine uncertainty about the boundary visible on the plans until the owners have resolved it. An award describes relevant works and arrangements under the Act. It cannot transfer a strip of land or grant a new private road right. Keep Kingston's planning decisions, building regulations material and private consents with the drawings issued for each purpose.
A baseline for a stepped garden
For the schedule of condition, work from the gate to the structure closest to the dig, giving each feature a label. A garden wall retaining a change in level should be distinguished from a freestanding screen or the flank of a garage. Take a general photograph showing the entrance and direction of view, add close views of existing repairs, then record any areas behind vegetation or stored items that could not be seen. Note the date and the person who provided access. A photograph taken across a locked side gate is a limited record of the far face.
A basement section may show permanent construction without explaining how the excavation will be retained alongside the neighbour. Ask for the sequence and the relationship between any temporary works and existing structures. Keep changes to those drawings dated. A change in retention method can affect what access or protection is needed even where the final plan looks the same.
When the adjoining work is in a back garden
Mark the nearest part of your property on the notice drawing and add any earlier construction or division plans. If your garage is entered from another road, show the right gate for a condition visit. Our adjoining-owner advice explains how to respond and how surveyors address relevant information that was missing from the first issue.
Coombe party wall questions
Does an open garden between the two main houses rule out notice?
Identify any closer building or structure and compare the actual excavation with the statutory tests. The gap between main houses is only one part of that investigation.
Where should photographs be taken if our wing was once a separate garage?
Include the connection to the original building and the nearest elevation to the work. Relate interior views to a plan and identify any earlier conversion detail on which the designer is relying.
Can a decision for another gated development establish whether an award is needed here?
A planning decision records a defined application. An assessment under the Act turns on the particular proposal, neighbouring structures and positions on your plot.