Take the section through the yard as well as the shop
Waverley Borough Council's appraisal of the Godalming Town Centre Conservation Area, dated September 2013 and adopted that December, describes a compact historic core whose character relies on its many listed buildings.
In the appraisal, some of the buildings are red brick fronted with a timber frame underneath; others show exposed frames or painted render, and most have pitched roofs and clay tiles. Church Street, the High Street and Bridge Street have the highest proportion of mixed-use buildings, for example a shop below with a home or office above, while many yards off the main street that would once have held workshops have been converted to office, retail or residential use.
Supply the layout and conversion records actually available, including revisions that show a different arrangement. The surveyor needs to understand those distinctions before interpreting a general description such as converted building.
Where work opens a wall between a shop and a converted yard building, determine where any beam will sit and what is directly above it. A drawing of the shopfront may show neither the rear building nor an upper dwelling extending past the shop's current demise. For an operation involving a party structure, assess the specific section 2 right and the section 3 notice under the Party Wall etc. Act 1996. Include enough of the adjoining floor plan for the neighbour to find the relevant part.
The contractor may propose to place temporary support in an occupied yard while work proceeds from the shop. Ask the designer to identify that position separately from the finished supports. Arrange any necessary access with the people entitled to provide it. An appointment to take photographs in the yard does not by itself permit props, storage or use of the gates throughout construction.
A change in height at Bridge Street
The appraisal contrasts lower buildings at the northern end of Bridge Street with taller Victorian forms nearer High Street.
Show any basement, roof rooms, different stair or rear addition on the plan supplied with the enquiry.
Photograph the roof or upper wall with the adjoining frontage visible before moving to closer images of the area affected. A similar storey count on either side of an opening does not mean floor levels coincide. Label each room by its floor and position relative to the street. If the roof can only be observed from higher ground, identify the viewpoint and the parts hidden by a parapet. A condition schedule records the accessible evidence as it stood on its inspection date.
If roofing work is reported at the property, identify the particular roof, slope or junction concerned and supply the records available.
Locate photographs and invoices against the plan, separating work to a rear building or extension from work to the street-facing part. Confirm the roof-space entrance and any restriction already known. An apparently continuous roof covering should not be treated as evidence that every component was renewed together or can be seen during the visit.
Excavation at a Farncombe return
The plan's character assessments add older stock: the Victorian Farncombe area has housing from small terraced cottages to semi-detached houses and larger villas, mainly of brick and tile with some Bargate stone, and on the south side of the town Victorian and Edwardian detached and semi-detached houses are set into Holloway Hill.
A rear extension can introduce a new boundary wall under section 1 and an excavation question under section 6. Show the width and location of the wall relative to the line of junction. In the excavation section identify the closest point to the adjacent return, the relative foundation levels and the deepest portion of the dig. When one plot sits above another, a dimension given only as depth below the building owner's garden can be misleading. Use a shared reference level and explain how the neighbouring foundation evidence was obtained.
It may be possible to retain a wall entirely or move a trench away from it as the design develops. Give each issue a date and drawing number and mark the changed edge. The surveyor needs to know if the contractor plans to use the earlier position shown to the neighbours or a later engineered solution. A verbal description of the adjustment provides little basis for comparing them.
Waverley permissions and the existing construction
Request the available alteration drawings, repair specifications and dated photographs. Mark the location of any exposed fabric shown in those records and keep the date or location uncertain where it is not known. Evidence from one room should not be extended to the whole building without a basis for that conclusion.
Check any planning or listed building decision for the particular elevation and proposed opening. Building control and the terms of any flat lease are separate from the party wall award. Old documents can explain access or the presence of a frame, but the owner still needs the right decisions for the present proposal. Record whether a change requested during a heritage review affects the part of the job covered by a notice.
Responding from an upper home or rear unit
Send your copy of the notice and identify the unit on a plan which includes the entire yard. Our guidance for neighbouring owners explains response and appointment options. If the proposed support lies close to a shared stair or the only route to your home, identify that feature and the practical access hours when arranging a visit.
Godalming, Surrey party wall questions
Does one shop number describe the upstairs property as well?
It may identify the street frontage while the occupied area above extends farther or has a separate lease. Supply floor plans and the dwelling entrance along with the information about ownership.
Is a picture taken from above the town useful for a condition schedule?
It can help locate roof slopes. Explain the vantage point and resolution, and support it with accessible closer observations where appropriate. It cannot document a hidden connection or the condition beneath a roof covering.
How can the builder identify a changed proposal in a former workshop yard?
Give the range its own plan reference. Supply the current section and show the superseded support on a revision drawing or register. Have the surveyor assess the change before the affected work is carried out.