A hipped pair and a roof extension
The 2023 Hillingdon study describes the neighbourhood as extending along Long Lane, with its historic heart at the Uxbridge Road and Royal Lane junction.
In the study, Metroland means privately built inter-war suburban housing, which tends to be detached or semi-detached with a hipped roof and generous spacing. It warns that where buildings are part of a symmetrical pair, substantial change such as loss of a hipped roof to a gable can have a significant detrimental impact. It adds that side extensions, including development over garages, can reduce the open feel of some streets.
If a new gable or dormer is proposed, show the roof arrangement on both sides of the dividing line. Does the design raise a shared wall, insert a steel or remove a shared stack? Identify the length of masonry affected, the detail that protects the neighbouring roof and the means of supporting it while the work is open. Under the Party Wall etc. Act 1996, relevant section 2 operations use the section 3 notice procedure. A change to the appearance of a hipped roof is a planning consideration, but does not establish the statutory operation by itself.
An enlarged house is easier to brief when the initial footprint and subsequent work are shown separately. Mark the kitchen addition, side accommodation, garage conversion and any room within the roof.
If the proposal uses a new post beside the former flank wall, ask how it is founded. A load path shown in the loft can end in an excavation at the side of the house. Keep a section through that point with the engineer's drawings rather than showing only the outer envelope approved by the council. Label any assumptions about the adjacent foundation and agree how the design team will check them before relying on the proposed depth.
Along the garden line of a terrace
Garden City style estates, the study says, were more likely to have been developed by the public sector, with buildings commonly grouped into terraces that are generally two storeys, solid but plain, with flat fronts. Original designs rarely allowed for cars, and it finds a high proportion of streets where gardens and verges have been lost to parking. In a terrace, ask how the rear is reached, who maintains any shared path, and when the front garden was paved.
For a new outer wall at the line of junction, give the surveyor the existing features and the intended face of the new structure for section 1. Show a surviving gatepost, a fence that turns at a rear extension and any old wall retained as part of the design. Their positions can help locate the work while leaving a disputed boundary to be resolved separately. For section 6, measure the excavation to the appropriate neighbouring building or structure, and establish the relevant depths. Include the nearest point of a later rear addition if it projects towards the works.
Access after a garage or passage has been enclosed
Check whether the side passage, garage and garden can be opened on the inspection day. If a conservatory or later extension blocks the view of an earlier wall, explain that in advance. Ask whether stored items prevent access to the roof hatch, and identify which upper spaces are rooms and which remain voids.
Planning access before the visit reduces avoidable gaps but cannot remove every restriction imposed by the building’s form or occupancy.
Arrange the adjoining condition visit while the relevant roof edges, garden return and passage surfaces are still visible. First take a general photograph with the garage entrance or a window in view. Then move in to record previously patched render or a joint at the point where a conservatory hides the original flank. Note when and from where the photograph was taken. A mark difficult to see through glazing may need a direct view by arrangement or a clear qualification in the written schedule.
Planning in the village
The council's list records that Hillingdon Village Conservation Area was designated on 15 March 1973, extended on 4 November 1976 and altered on 20 April 1994, and it offers a map for the area rather than an appraisal. The 2023 study sums up its character as a historic village and school.
Hillingdon's council map is one check when planning a change to an older village building. Find the current record of the relevant consent and obtain drawings of previous roof work where available. A planning grant allows only what it describes and does not decide who owns a separating wall, whether a notice must be served, or how works can be carried out from a neighbour's garden. Keep the building control documents and any required private permission alongside the design file. An award and its agreed access arrangements address the matters within the Act.
If a neighbour is building over a former garage
Mark your own wall or side return on the scheme if it is missing. Supply the full notice, delivery date and accompanying details, including any drawing that appears to be issued only for planning. The adjoining owners’ notice guide explains the available responses. An earlier plan of your garage can help identify a relevant junction, provided its status and what has changed since are clear.
Hillingdon party wall questions
Does a roof plan show enough to assess a new gable?
Include the joining section and how the existing work will be cut, supported or raised. A room plan or proposed elevation alone may leave both the bearing and temporary weathering unresolved.
Can our shared path be used for construction because the surveyor visited by that route?
An agreed inspection does not settle the later access position. Explain what is proposed for the works, its purpose and timing, and ask the surveyor to address any access that falls within the Act.
Should earlier photographs of a filled crack be left out of the condition record?
They can be retained with dates and the source identified. The schedule should separately describe what was visible at the pre-works appointment, including any covering which limited inspection.