The party structure above the shop
A November 2023 baseline report for the council's town centre master plan, by David Lock Associates, places a concentration of listed buildings around West Street, South Street and the wide Market Square. It dates individual buildings from the town's emergence as a spa in the 17th century onwards. The report describes consistent heights of two to three storeys in the town centre conservation area, with a prevailing roofscape of hipped and pitched tile or slate roofs sometimes behind parapets.
When proposing to alter a roof over a shop, show which part encloses a flat and where the next building joins it. A pitched slope can end at a parapet whose far face is visible only from the adjoining property. A change to a shared parapet or a bearing in a party structure needs to be assessed against the works specified in section 2 of the Party Wall etc. Act 1996. If those provisions apply, the party structure notice comes under section 3. A drawing of the completed roof alone may leave the proposed opening and temporary weather protection unclear.
If accommodation extends into the roof, explain whether a separate void remains behind it. Request the history of any leak or roof repair with the affected location rather than a general statement that the roof was attended to.
Do not assume that the shop’s entrance, rear yard or roof is included in the flat’s accessible inspection area.
Ask who can open the common areas and whether the surveyor can see the exterior serving the flat from the rear. If a repair has been carried out by another occupier or the freeholder, request that record and its date. Questions about shared maintenance and permission to alter the building should be addressed alongside, but separately from, observations about the accessible fabric of the flat.
Before a scaffold is designed on the assumption that another owner will provide space, locate its base, the entrance to the upper dwelling and the route customers use. Identify whose permission or other authority is needed for entry. A neighbour who opens the flat for a schedule of condition has agreed a visit for that purpose.
A flint wall and a new garden room
The Worple Road Conservation Area appraisal of December 2010 says most of its historic buildings were built as family houses between the 1860s and 1910, with a two-storey detached or semi-detached house as the predominant type. It records red or yellow London stock brick with slate or tiled roofs, and knapped flint in many boundary walls. The Stamford Green Conservation Area appraisal of October 2007 notes late 19th century cottages, many of them built to house workers in the hospitals, and weather-boarded cottages among its reminders of old Surrey.
On a Worple Road plot, distinguish the existing garden wall from the intended wall of the new room. Mark the boundary evidence and the position of each face. The material the council records for boundary walls cannot establish how a particular wall stands relative to the legal line or who has rights over it. Assess building a new wall at that line under section 1. Any proposal to alter an existing wall between owners needs its own examination.
Show an enlarged section through the garden-room footing at its closest approach to the neighbouring house or other structure. Section 6 sets distance and depth tests. Include any local deepening for a column as well as the general trench, and record what evidence exists for the neighbour's foundation depth. If the contractor proposes a change to the construction sequence, make the surveyor aware while there is still time to review it.
The first page of a useful condition schedule
A roof project above the Market Square should name the flat, floor and access stair, then locate each affected room relative to the shopfront. Include the highest accessible internal surfaces beside the work and the outer face of the parapet where it can be seen. Describe a joint, stain or previous patch by its position and appearance. Record who supplied any dated photograph of an earlier leak instead of presenting that history as something observed on the day.
Epsom and Ewell Borough Council's town-centre baseline describes a mix of exterior treatments.
It describes red brick as predominant, alongside painted render, applied timber framing, pargetting, stonework, weatherboarding and terracotta. This range is recorded within the conservation-area context, not as a list of materials present in every Epsom house.
A decorative timber treatment, for example, should not be used on its own to identify the structural frame behind the wall. The street elevation is one part of that assessment, not the entire building.
The council planning decision, building regulations documentation and any approval required from the superior landlord should each be matched to the relevant drawing. An award addresses the matters within the Party Wall Act. Where a design condition changes the height of the parapet or extent of the foundations, send the revised detail back to the surveyor.
Receiving a notice for work above your business
Keep the notice with its sections, recorded service date and drawings. Mark the shop, store or flat you control and identify any ceiling below the proposed work. Our adjoining owners' guide sets out response choices. If there are opening hours or an access alarm to consider, agree these practical matters when arranging a condition visit.
Epsom party wall questions
Can the notice simply describe a dormer above the shop?
Show how the roof is opened, the support and weathering against the adjoining building and the floor or premises below. Those details allow the surveyor to assess the operations rather than relying on the name of the finished feature.
What belongs in the survey file for a mixed flint and brick boundary?
Locate each section on the plan, record its visible faces and the adjoining ground level, and attach available records of construction or repair. Establish the legal position from the relevant evidence rather than the change in material.