Trace the roof into the rear addition
Wandsworth records the former grounds of Furzedown House being developed after 1900, including Moyser, Pendle, Pretoria and Penwortham Roads. It describes mainly two-storey red-brick terraces with gabled street fronts. This identifies a particular housing pattern without establishing the plan or later alterations of every property in those roads.
Identify the roof over the front gable separately from any extension roof behind. If the kitchen occupies a widened or lengthened room, request the drawings for that work and mark the connection to the earlier house. Explain which external elevations can be approached and whether there is a route to the garden without passing through occupied rooms. A regular front elevation can help locate the house, but the survey brief also needs the less visible parts where the accommodation has been changed.
If a new loft beam crosses the house, ask for both bearing details. An end might sit on a new post inside the property while the other is pocketed into masonry separating it from the next house. Section 2 of the Party Wall etc. Act 1996 concerns specified work to party structures. A section 3 party structure notice is the procedure for relevant work. An attractive drawing of the dormer tells a neighbour where it will be visible, but leaves unanswered how the structure will be supported.
Request the relevant plans and completion documents, and show where the newer staircase enters the roof. Ask which remaining roof spaces have hatches and whether insulation, stored belongings or fitted finishes restrict access. The survey should state the fabric examined and any areas requiring further information.
A stair cut into an existing ceiling changes what can be seen in the room below. In the schedule of condition, name that room and show the area of ceiling beside the proposed work. Where an older roof conversion is already present on the other side, ask for its structural information if available. Keep its original drawings and any evidence of subsequent changes together.
Make the line of the wall legible
For a kitchen extension on a terrace, run the new wall line across both the plan and the section. State whether it will stand entirely on the building owner’s land at the boundary or whether the design proposes a wall astride it. Section 1 has distinct provisions for those cases. Mark the end of any existing party wall and where the rear boundary structure begins. A garden fence cannot establish which brickwork belongs to whom.
Once the engineer has located the trench, relate it to the adjoining building, including any extension beside the kitchen. Section 6 requires a distance and depth assessment. If one part of the neighbouring footing was exposed during an earlier job, show that position and the measured level. An old drawing that leaves the datum unclear needs explanation before its dimension can be compared to the proposed excavation.
Detached plots around Abbotsleigh Road
The Historic Environment SPD describes Abbotsleigh Road as a varied collection of two-storey detached houses associated with the Wates family. The named group should not be treated as interchangeable with the red-brick terrace grid nearby.
Ask whether vegetation, fences or a neighbouring structure prevents a view of any wall. A larger plot does not itself establish access rights or the condition of underground drainage.
At the side of a detached house the closest structure to the dig might be a neighbour’s return, a garage or a retaining wall. Include its location and present ground levels rather than measuring only between the two main houses. Where access for a temporary inspection or protection is being proposed, name the precise place, reason and likely duration. There can be room to carry out a design on paper without room to carry it out safely from a narrow side passage.
Distinguish the old finish from an observed change
Arup's December 2021 Urban Design Study for Wandsworth names this the Furzedown Residential character area. It describes render, pebbledash and brick facades, and says original features such as sash windows and cross-gabled roofs add richness to the streets.
Photograph any existing marks in the render or pebbledash in context. An overall image should identify the property and elevation, with a closer view showing the patch being recorded. Where a decorative finish covers the junction between two phases of building, record what is visible and the limit of the observation. Do not take the surface pattern alone as a reliable indication of the underlying wall. For comparison after the work, identify the date of the original visit and number the images against the plan.
Policy LP5 of Wandsworth's Local Plan, adopted on 19 July 2023, expects a dormer or other roof alteration to be confined to the rear of the building.
Wandsworth’s planning decision, a building regulations completion record and any landlord consent belong in the job file against their own drawings. A party wall award addresses the relevant statutory dispute. If the planning stage alters the roof position or the contractor proposes a different detail at a beam end, pass the change to the surveyor before it is built.
The owner beside the proposed dormer
Send the received notice and drawings with the date of receipt and a photograph locating your roof in the pair. Our guide for adjoining owners explains the response routes. Identify any repaired junction you would like included in the condition visit and who is able to open the loft hatch. A roof seen from a landing window should be described from that viewpoint if closer inspection was unavailable.
Furzedown party wall questions
Should a schedule describe an existing loft behind fitted panels?
It can record the accessible room and visible finishes, with the panels and concealed void identified. Give the surveyor any earlier photographs or drawings to help locate the work without implying the concealed timber was inspected.
What does the owner of a detached neighbour need to see?
Request the excavation section and location of their nearest building or structure. Check the distance, depths and proposed temporary work so the surveyor can assess the statutory position for that neighbour.
Can the council identify whether the planned beam needs party wall notice?
The surveyor assesses the operation under the Act. The council and building control records can help describe the building and provide permissions or approved details, while the notice assessment concerns the specific shared structure.