From Cowley Road to the return behind the house
West of White Hart Lane, the guidance picks out Edwardian houses on Cowley Road with shaped gables displaying 1911 date stones, and red brick terraces at the northern end of White Hart Lane with gabled square double bays, noting that irregular rooflights are widespread along that stretch of the lane. Ripley Gardens is described as an interwar development with roughcast render and first floor bow windows.
Send a plan showing the rooms behind the gabled frontage and any accommodation added at the rear or in the roof. Explain where the rear roof slopes can be viewed and whether the loft is accessible.
For a dormer or new floor, show how the intended timber or steel would be supported at the party wall. Locate the original roof and any changes made for a neighbouring loft room. Two roofs that appear level at the street may meet differently behind the gable. Ask for a section through the actual bearing and any change to parapet height or flashing. A photo of a similar pair can identify a question worth asking but cannot settle how this support will be formed.
A section 2 right under the Party Wall etc. Act 1996 may apply to cutting into, raising or otherwise carrying out specified work to a party structure. The relevant party structure notice is under section 3. Identify the operations proposed, not just the building project. Removing a ceiling finish to examine a roof and cutting a steel bearing into the dividing masonry have different implications. Supply the structural detail and identify who can arrange access on each side.
An interwar house or a flat at Chertsey Court
Richmond’s Kingsway character account records interwar semi-detached houses in Langdon Place, built in brick with rendered upper storeys. The document describes differences within a small study area rather than one standard Mortlake house.
For a house, provide its current footprint and records for additions or altered roof accommodation. For a Chertsey Court flat, identify the block and floor and ask for the lease plan and available maintenance information. Explain access arrangements for shared stairs, external areas and any roof space relevant to the instruction.
If a proposed rear opening requires temporary support, plot the location of each support and explain whether it can stand wholly on the building owner's side. If a footing will be dug for a new frame, assess that excavation against the neighbour's house and against any nearer garage or return. Take the section through the closest structure. Mark where the depths of existing foundations are evidenced and where the designer has shown only an assumption.
If building a new wall at the line of junction, consider section 1 independently of the excavation. For section 6 a distance from the proposed works to the garden fence alone gives an incomplete picture. Show proposed foundation depth, the distance to the adjoining structure and its relevant levels. If a deeper drain trench will be dug later in the same space, the design information should cover that too.
Recording the repair history on the correct part of a terrace
The 2015 guidance records that Mortlake Conservation Area was designated in 1982 and extended in 1996, with its historic core around St Mary's Church and many fine eighteenth century listed houses on the riverside and High Street. Original details it lists include ground floor bay windows with decorated metalwork, roofs laid in diamond pattern slate, timber bracketed porches and chimneys with corbelled and dentilled brickwork. Mortlake Green Conservation Area, designated in 1988 and extended in 1998, is described with three or four storey late-nineteenth century terraces around the Green.
Before work, identify the roof, front or rear bay and any altered entrance that could be affected. A dated record can describe a previous brick repair or a mark on plaster without treating its position as proof of the cause. Include context views that connect the close-ups with the house and room. Note when recent decoration or an inaccessible loft hatch prevents observation of the area behind a lining.
If work is beside a passage, agree arrangements with the person holding its key and record the route on the layout. If materials need to cross a neighbour’s garden, distinguish that construction proposal from the initial visit and give the neighbouring owner the dates, working space and protection to consider. Confirm whether anyone outside the household controls a separate store or gate on the route.
What the council’s village guidance can tell you
The London Borough of Richmond upon Thames prepared the village planning guidance. Use it to identify the documented street group, then check the property record for the address actually affected. A permission to change the front roof may say little about a beam proposed in rear masonry. Keep the planning decision and supporting drawings, building control information and any private lease consent alongside the engineer’s current structural details. Each serves a different purpose from a party wall award.
If your Mortlake house or flat is next to the project
Note the date the notice reached you and keep the enclosures. Tell the surveyor where a converted roof room or later extension meets the illustrated works and who controls inspection access. Our service for adjoining owners explains the response options. An older photograph of a roof junction can help locate a former stack, particularly where a new lining prevents anyone seeing the original wall from below.
Mortlake party wall questions
Should a rooflight shown in the street guidance be treated as proof of a loft floor?
Check the drawings and inspect the accessible arrangement. A window can identify a place to investigate but cannot establish the support for a newly proposed floor or the history of its construction.
What if part of the scaffold stands beside a block entrance?
Identify the entrance used by each flat and the proposed scaffold footprint. Set out the access route and proposed protection to the manager and the owners concerned before relying on the space.
Which address should appear on the photograph sheet at a shared rear lane?
Record the house or block, the side of the lane and the particular return, then add the room or elevation and point of view. That makes a later comparison possible even when several properties share the same route.