The short answer
Usually because the treatment did not deal with the cause. An injected damp-proof course and new plaster will not cure rain getting in through gutters, pointing or render, ground levels that bridge the wall, plumbing leaks or condensation. Salts left in old plaster can also draw moisture from the air. Find the cause before treating again.
What Savas checks
- When and where the damp returned, compared with what was treated and when.
- The outside of the treated wall: gutters, downpipes, pointing, render and ground levels.
- Whether the new plaster or render suits the wall or is trapping moisture.
- Condensation and ventilation in the room.
- Heating pipes, plumbing and waste pipes in or near the wall.
- The treatment paperwork and any guarantee, and what it covers.
Chemical injection may be appropriate in some cases, but only after proper diagnosis and once external causes have been dealt with.
When to call a specialist
A building pathology investigation using gravimetric testing can show whether moisture or salts are the problem. If a guarantee applies, contact the company that installed the treatment and keep records; an independent diagnosis helps you judge whether the problem falls within it.
Answered by
Savas Bulduk BSc (Hons) MRICS, Director & Chartered Building Surveyor
Topic
Related service
A typical enquiry
An owner of a Victorian terraced house in SE22 had an injection treatment and replastering, and the tide mark reappeared within two winters. In a case like this Savas compares the damp pattern with the outside of the wall and the ground level, and checks whether the replastering is trapping moisture, before any second treatment is quoted.
This example is generalised from the kinds of enquiry we receive. Names, addresses and other identifying details are not used.