The short answer
Most damp in London houses comes from water getting in from outside, through failed gutters, pointing or render or high ground levels, or from condensation inside. True rising damp is less common than often claimed. The cause decides the cure, so find it before paying for treatment: a wrong diagnosis wastes money and leaves the damp in place.
What Savas checks
- Where the damp sits and its pattern: low on a wall, around a window, below the roof, or in cold corners and behind furniture.
- Gutters, downpipes, flashings, pointing and render on the outside of the damp wall.
- External ground and paving levels against the damp-proof course and air bricks.
- Condensation: ventilation, extract fans, heating patterns and mould on cold surfaces.
- Plumbing, waste pipes, showers and baths above or beside the damp patch.
- Earlier treatments, replastering or tanking that may hide or trap moisture.
Moisture-meter readings are read alongside the building, never on their own: an electrical meter can read high where salts are present.
When to call a specialist
If the cause is not clear from a visual inspection, or the damp keeps returning, a building pathology investigation using gravimetric testing gives a firmer answer than meter readings. Call a plumber first if you suspect a live leak, and ask for any damp-proofing quotation only once the cause is known.
Answered by
Savas Bulduk BSc (Hons) MRICS, Director & Chartered Building Surveyor
Topic
Related service
A typical enquiry
A buyer of a Victorian terrace house in N16 notices a damp patch at skirting level in a freshly redecorated front room, and the seller’s damp company has quoted for injection. In a case like this Savas looks at the outside first: the paving level against the wall, the gutter and downpipe above, and the pointing, before anyone prices a treatment.
This example is generalised from the kinds of enquiry we receive. Names, addresses and other identifying details are not used.